Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Mazda >> 2004 >> Tribute DX, FWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System >> Powertrain Control Module (Pcm) Inspection >> Using SST (104 Pin Breakout Box)

Using SST (104 Pin Breakout Box)

Download the full database via torrent (~1.1 TB)
  1. Disconnect the negative battery cable.
  2. Disconnect the PCM connector.
  3. Connect the SST (104 Pin Breakout Box) to the PCM as shown in illustration.
    Fig 1: Connecting SST (104 Pin Breakout Box) To PCM
    G00984929Courtesy of MAZDA MOTORS CORP.
  4. Tighten the connector bolt.
    1. Tightening torque 7.9 - 10.7 N.m (80 - 110 kgf.m, 69.5 - 95.4 ln.lbf) 
  5. Connect the negative battery cable.
  6. Measure the voltage at each terminal.
  7. If any incorrect voltage is detected, check related systems, wiring harnesses and connectors.
scientia non olet · About Brad's Car Manuals