Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Mazda >> 2005 >> 3 i, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> On-Board Diagnostic [Engine Control System] >> After Repair Procedure

After Repair Procedure

Download the full database via torrent (~1.1 TB)  |  Custom patches
  1. Turn the ignition switch off.
  2. Connect the WDS or equivalent to the DLC-2.
    NOTE:
    • Be sure the ignition switch is turned off before performing the following procedure.
  3. Turn the ignition switch to the ON position (Engine off).
  4. Record the DTC if retrieved.
  5. Clear all diagnostic data using the WDS or equivalent.
    Fig 1: Locating DLC-2 16-Pin Connector
    G03635621Courtesy of MAZDA MOTORS CORP.
scientia non olet · About Brad's Car Manuals