Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Mazda >> 2005 >> 3 i, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Symptom Troubleshooting [Engine] >> Engine Control System Operation Inspection >> Fuel Pump Operation Inspection >> Notes

Fuel Pump Operation Inspection: Notes

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. Remove the fuel-filler cap.
  2. Turn the ignition switch to the ON position.
  3. Turn the fuel pump relay from off to on using the FP PID and inspect if the operation sound is heard.
    • If no operation sounds is heard, proceed to next step.
  4. Measure voltage at wiring harness side fuel pump connector terminal C (California emission regulation applicable model), A (except for California emission regulation applicable model).
scientia non olet · About Brad's Car Manuals