Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Mazda >> 2005 >> 6 i, 4D Hatchback, Automatic >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (L3) >> Neutral Switch Inspection >> Continuity Inspection >> Notes

Continuity Inspection: Notes

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. Disconnect the negative battery cable.
  2. Remove the neutral switch. (See MANUAL TRANSAXLE REMOVAL/INSTALLATION .)
  3. Inspect for continuity between the neutral switch terminals using an ohmmeter.
    • If the neutral switch is normal, but PID value is out of specification, perform the "Circuit Open/Short Inspection".
    • If not as specified, replace the neutral switch.
      Fig 1: Identifying Neutral Switch
      G03644150Courtesy of MAZDA MOTORS CORP.
scientia non olet · About Brad's Car Manuals