Ignition Switch Inspection

Download the full database via torrent (~1.1 TB) | Download Brad's custom LEMON patches

Disconnect the negative battery cable.
Remove the column cover. (See COLUMN COVER REMOVAL/INSTALLATION. )
Disconnect the ignition switch connectors.
Inspect for continuity between the ignition switch terminals.
- If not as specified, replace the ignition switch.
  
  Fig 1: Ignition Key Continuity Reference Chart
  Courtesy of MAZDA MOTORS CORP.
  
  Fig 2: Inspecting Continuity Between Ignition Switch Terminals
  Courtesy of MAZDA MOTORS CORP.