Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Mazda >> 2007 >> 6 Mazdaspeed >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Ignition System (L3 With TC) >> Spark Plug Removal/Installation

Spark Plug Removal/Installation

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
CAUTION:
  • If a spark plug that is not as specified is installed, engine performance will be deteriorated. Install only the specified spark plug when replacing.
  1. Disconnect the negative battery cable.
  2. Remove the charge air cooler. (See INTAKE AIR SYSTEM REMOVAL/INSTALLATION ).
  3. Remove the ignition coils. (See IGNITION COIL REMOVAL/INSTALLATION ).
  4. Remove the spark plug using a plug-wrench.
  5. Install in the reverse order of removal.

    Tightening torque 

    10-14 N.m {1.1-1.4 kgf.m, 8.0-10.3 ft.lbf}