Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Mazda >> 2007 >> CX-7 Touring, FWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (L3 With TC) >> Knock Sensor (KS) Removal/Installation

Knock Sensor (KS) Removal/Installation

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
CAUTION:
  • Be careful not to impact the sensor.
  • Verify that there is no debris between the sensor and the cylinder block before installing.
  1. Disconnect the negative battery cable.
  2. Remove the intake manifold. (See INTAKE AIR SYSTEM REMOVAL/INSTALLATION )
  3. Remove the KS attachment bolt to remove the KS.
  4. Install in the reverse order of removal.

    Tightening torque 

    16-24 N.m {1.7-2.4 kgf.m, 12-17 ft.lbf} 

    Fig 1: Identifying Knock Sensor
    G04859848Courtesy of MAZDA MOTORS CORP.