Caster Adjustment

Caster Adjustment

Caution: Adjust the caster after adjusting the camber.





1. Loosen the installation nut of the adjusting cam bolt (front lower arm rear side).





2. Rotate the adjusting cam bolt in either direction to adjust the caster.

Vehicle equipped with 16-inch wheel:

Vehicle equipped with 17-inch wheel:

^ From the end of the rear fender to the center of the wheel (mm [in))





3. Tighten the nut.
Tightening torque 117.7 - 137.3 Nm (12.1 - 14.0 kegs-cm, 86.9 - 101.2 ft. lbs.)
4. Adjust the camber and total toe-in.