Spark Plug: Service and Repair

Download the full database via torrent (~1.1 TB)

SPARK PLUG REMOVAL/INSTALLATION[L3 WITH TC]

CAUTION: If a spark plug that is not as specified is installed, engine performance will be deteriorated. Install only the specified spark plug when replacing.

1. Remove the battery cover.
2. Disconnect the negative battery cable.
3. Remove the charge air cooler.
4. Remove the ignition coils.
5. Remove the spark plugs using a plug-wrench.
6. Install in the reverse order of removal.

Tightening torque : 1 - 14 Nm (1.1 - 1.4 kgf-m, 8.0-10 ft-lbf)