Coolant Temperature Sensor/Switch (For Computer): Service and Repair

Download the full database via torrent (~1.1 TB) | Download Brad's custom LEMON patches

ENGINE COOLANT TEMPERATURE (ECT) SENSOR REMOVAL/INSTALLATION[L3 WITH TC]

WARNING: A hot engine can cause severe burns. Turn off the engine and wait until it is cool before removing the ECT sensor.

1. Remove the charge air cooler cover.
2. Drain the engine coolant. (See COOLING SYSTEM SERVICE WARNINGS[L3 WITH TC].)
3. Disconnect the ECT sensor connector.

4. Remove the ECT sensor.
5. Install in the reverse order of removal.

Tightening torque 10-14 N.m{1.02-1.42 kgf.m, 7.38-10.32 ft.lbf)

6. Refill the engine coolant. (See COOLING SYSTEM SERVICE WARNINGS[L3 WITH TC].)