Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Mazda >> 2008 >> B2300 L4-2.3L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Oil Pressure Sensor >> Testing and Inspection

Oil Pressure Sensor: Testing and Inspection

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches


OIL PRESSURE SENSOR INSPECTION - 4.0L

1. Remove the oil pressure switch.
2. Screw oil pressure gauge SST 49 0187 280 into the oil pressure switch installation hole.






3. Run the engine at 2,000 rpm and note the engine readings.
4. If pressure is not within specification (276-413 kpa, 2.8-4.2 kgf/cm2, 40-60 psi) see Engine Component Test for further diagnosis.
5. Apply sealant to oil pressure switch threads.
6. Remove SST and install switch.
Tightening torque 11-24 N-m {1.1-2.4 kgf-m, 8-18 ft-lbf}