Camshaft Position Sensor: Service and Repair

Download the full database via torrent (~1.1 TB) | Download Brad's custom LEMON patches

CAMSHAFT POSITION (CMP) SENSOR REMOVAL/INSTALLATION [MZI-3.7]

1. Disconnect the negative battery cable.

2. Remove the following part for easier access.

- Remove the resonance chamber and air cleaner assy. Service and Repair

3. Disconnect the CMP sensor connector

4. Remove the CMP sensor.

NOTE:
- Lubricate the CMP O-ring seal with clean engine oil.

5. Install in the reverse order of removal.