Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Mazda >> 2010 >> Tribute 2WD L4-2.5L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Engine Control Module >> Testing and Inspection >> Monitors, Trips, Drive Cycles and Readiness Codes

Monitors, Trips, Drive Cycles and Readiness Codes

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches



QUICK TEST

On-Board Diagnostic Test

On-Board System Readiness Tests Access Procedure

1. Carry out the necessary vehicle preparation and visual inspection. Hook up the IDS or equivalent tester to the vehicle.






2. Connect the IDS or equivalent tester to the vehicle DLC-2 16-pin connector located on the left side of the center console.

3. Monitor the OBD II systems operating status by IDS or equivalent tester.