Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Mazda >> 2011 >> 2 Touring, 1.5 Z, Automatic >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System MZR 1.5 >> Manifold Absolute Pressure (Map) Sensor Removal/Installation

Manifold Absolute Pressure (Map) Sensor Removal/Installation

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. Disconnect the negative battery cable.
  2. Remove the fresh-air duct and the air cleaner as a single unit. (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION .)
  3. Disconnect the MAP sensor connector.
  4. Remove the MAP sensor
  5. Install in the reverse order of removal.
    Fig 1: Identifying MAP Sensor
    G06940769Courtesy of MAZDA MOTORS CORP.
scientia non olet · About Brad's Car Manuals