Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Mazda >> 2011 >> RX-8 R3, 1.3 2 >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Knock Sensor (KS) Removal/Installation

Knock Sensor (KS) Removal/Installation

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [13B-MSP] .)
  2. Disconnect the negative battery cable.
  3. Disconnect the KS connector.
  4. Remove the KS.
  5. Install in the reverse order of removal.
Fig 1: LS Connector Screws With Torque Specifications
G05981153Courtesy of MAZDA MOTORS CORP.
scientia non olet · About Brad's Car Manuals