Ignition Lock: Service and Repair

Download the full database via torrent (~1.1 TB) | Download Brad's custom LEMON patches

IGNITION LOCK CYLINDER REMOVAL/INSTALLATION

NOTE:For non-functional ignition lock cylinders, the steering column lock module has to be replaced. See Service and Repair.
1. Remove the passive anti-theft system (PATS) transceiver. See Removal and Replacement.

2. Using a suitable tool, press the release pin and remove the ignition lock cylinder.

NOTE:The ignition lock cylinder must be in the RUN position.
3. To install, reverse the removal procedure.

- Verify the ignition lock cylinder operation.