Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Mazda >> 2012 >> CX-7 FWD L4-2.5L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Camshaft Position Sensor >> Testing and Inspection

Camshaft Position Sensor: Testing and Inspection

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches




CAMSHAFT POSITION (CMP) SENSOR INSPECTION [L5]

Visual Inspection

1. Disconnect the negative battery cable.

2. Remove the plug hole plate. Service and Repair

3. Disconnect the CMP sensor connector.

4. Remove the CMP sensor. Service and Repair

5. Verify that there are no metal shavings on the CMP sensor.

- Remove any metal shavings that are adhering.

Voltage Inspection

1. Idle the engine.

2. Measure the CMP sensor output wave pattern using an oscilloscope. (See Component Tests and General Diagnostics)

- If not within the specification, replace the CMP sensor. Service and Repair