Lighting Systems

Download the full database via torrent (~1.1 TB)

AUTO LIGHT/WIPER CONTROL MODULE REMOVAL/INSTALLATION

NOTE:
- Auto light-off system are integrated with the auto light/wiper control module.

1. Disconnect the negative battery cable.

2. Remove the dashboard under cover (Driver side). Dashboard Under Cover Removal/Installation

3. Remove in the order indicated in the table.

4. Install in the reverse order of removal.

5. Perform the auto light/wiper control module configuration. Auto Light/Wiper Control Module Configuration

CAUTION:
- Perform the auto light/wiper control module configuration after replacing the auto light/wiper control module to assure that the auto light/wiper system operates correctly.