Front Climate Control Unit Inspection

Download the full database via torrent (~1.1 TB)

FRONT CLIMATE CONTROL UNIT INSPECTION

1. Connect the front climate control unit connector.

2. Switch the ignition to ON.

3. Connect the negative (-) lead of the tester to body ground.

4. By inserting the positive (+) lead of the tester into each front climate control unit terminal, measure the voltage according to the terminal voltage table.

- If there is any malfunction, inspect the parts under "Inspection item (s)".

- If the parts under "Inspection item (s)" are found to be normal, replace the front climate control unit.

Terminal Voltage Table (Reference)