Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Mazda >> 2016 >> CX-9 Signature >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Ignition Coil/Ion Sensor Removal/Installation >> Ignition coil/ion sensor Removal Note

Ignition coil/ion sensor Removal Note

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. Disconnect the connector and hoses shown in the figure.
    Fig 1: Disconnecting Connector And Hoses
    G10947029Courtesy of MAZDA MOTORS CORP.
  2. Remove the bolts shown in the figure.
    Fig 2: Removing Bolts
    G10947030Courtesy of MAZDA MOTORS CORP.
  3. Set the purge solenoid valve component aside as shown in the figure.
    Fig 3: Setting Purge Solenoid Valve Component
    G10947031Courtesy of MAZDA MOTORS CORP.
  4. Remove the ignition coil/ion sensors.
scientia non olet · About Brad's Car Manuals