Charging system warning Light

Verify that the battery is fully charged.
Verify that the assembly condition of the drive belt is correct. (See DRIVE BELT INSPECTION [SKYACTIV-G 2.5T] .)
Switch the ignition ON, verify that the charging system warning light illuminates.
- If it does not illuminate, inspect the charging system warning light and the wiring harness.
  - If the charging system warning light and the wiring harness are normal, inspect the PCM.
Verify that the charging system warning light turns off after the engine is started.
- If the charging system warning light does not turn off, perform the DTC inspection, then perform troubleshooting according to the corresponding diagnostic procedure. (See ON-BOARD DIAGNOSTIC TEST [PCM (SKYACTIV-G 2.5T)] .) (See DTC TABLE [PCM (SKYACTIV-G 2.5T)] .)