Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Mercury >> 1976 >> Capri II Ghia, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Ignition System >> MOTORCRAFT Solid State Ignition >> Testing >> Ignition Coil Test

Ignition Coil Test

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches

With ignition off, check secondary resistance between Red wire (pin No. 4) and coil tower. Resistance should be 7000-13, 000 ohms. Check primary resistance between Green wire (pin No. 1) and Blue wire (pin No. 6). Resistance should be 1-2 ohms. If resistance is within limits but the coil is still suspected, test coil on a standard coil tester. If reading differs from the original test, check for a defective harness.