Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Mercury >> 1983 >> Capri Base, Automatic >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Ignition System - DURA-Spark II >> Testing >> Resistance Wire Check

Resistance Wire Check

Download the full database via torrent (~1.1 TB)
  1. Disconnect 2-wire control module connector and remove coil connector from coil. Connect ohmmeter leads to "BATT" terminal of coil connector and to harness connector terminal mating with Red control module wire. Read ohmmeter, then reconnect all connectors.
  2. If resistance is .8-1.6 ohms, problem is either intermittent or not in ignition system. If resistance was less than .8 or more than 1.6 ohms, replace resistance wire.
scientia non olet · About Brad's Car Manuals