Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Mercury >> 1991 >> Capri Base, Automatic >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel System >> Oxygen (O2) Sensor >> Removal & Installation

Removal & Installation

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches

Disconnect negative battery cable. Disconnect wire harness connector, and remove oxygen sensor. If exhaust sensor is difficult to remove, use rust penetrant to avoid possible damage to exhaust threads. If new sensor is not pre-coated with anti-seize, apply anti-seize compound to sensor threads. DO NOT remove anti-seize from sensor. To install, tighten sensor and attach wire harness connector.