Ignition System: Distributor: Installation

Download the full database via torrent (~1.1 TB) | Download Brad's custom LEMON patches

To install, reverse removal procedure. Install new "O" ring if damaged or worn. Insert distributor and rotate until offset drive tangs engage camshaft slots. See Fig 1 , Fig 2 or Fig 3 . Check and adjust timing as required.

NOTE: On Festiva, DO NOT disassemble distributor. Entire unit is serviceable only by complete replacement.

Fig 1: Exploded View of Distributor Assembly (Festiva)

Courtesy of FORD MOTOR CO.

Fig 2: Exploded View of Distributor Assembly (Capri Non-Turbo)

Courtesy of FORD MOTOR CO.

Fig 3: Exploded View of Distributor Assembly (Capri Turbo)

Courtesy of FORD MOTOR CO.