Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Mercury >> 1997 >> Villager LS >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System >> Pinpoint Test D >> Pinpoint Test D4 >> Check Power Supply To ABS Control Module

Check Power Supply To ABS Control Module

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. With ignition switch in OFF position, connect breakout box with breakout box adapter to ABS control module connector. Leave ABS control module disconnected.
  2. With ignition switch ON, measure voltage on Light Green wire at breakout box pin No. 1. If reading is more than 10 volts, go to PINPOINT TEST D5  . If reading is less than 10 volts, service Light Green wire between interior fuse panel and ABS control module.
scientia non olet · About Brad's Car Manuals