Transmitter Reprogramming

Download the full database via torrent (~1.1 TB) | Download Brad's custom LEMON patches

To reprogram all transmitters, cycle ignition switch from LOCK to RUN position 8 times within 10 seconds, ending in RUN position or LOCK to START position 4 times in 10 seconds, ending in RUN position. After doors lock and unlock, press any button on all remote transmitters (up to limit of 4). With each button press on remote transmitter, door locks should cycle (lock/unlock) to confirm programming. Once completed, turn ignition switch to LOCK position. Door locks should cycle (lock/unlock) one last time to confirm completion of programming. All transmitters must be reprogrammed at the same time.