Powertrain Control Module (PCM): Removal
- Retrieve the module configuration. Carry out the module configuration retrieval steps of the Programmable Module Installation procedure. For additional information, refer to MODULE CONFIGURATION .
- Disconnect the battery ground cable. For additional information, refer to BATTERY, MOUNTING AND CABLES .
- Remove the cowl panel grille. For additional information, refer to FRONT END BODY PANELS .
- Disconnect the 3 PCM electrical connectors.
- Remove the bolt and the PCM.
NOTE:
Any PCM replacement will require that ALL customer keys are available to be programmed at the time of installation. PCM replacement DOES NOT require new keys.