Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Mitsubishi >> 1986 >> Starion ESI-R >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Fuel Injection System - MITSUBISHI >> Testing >> Fuel Injection

Fuel Injection

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. Set ignition switch to "OFF" position. Disconnect secondary wire of ignition coil. Remove air intake pipe from port on injection mixer to make visual inspection of injection status.
  2. Turn ignition switch to "START" position while observing injection operation. Return ignition switch to "OFF" position and verify that fuel does not leak from injector nozzles.
  3. Injection should occur when ignition is turned on and leakage should not take place with ignition off. Reconnect secondary wire to ignition coil.