Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Mitsubishi >> 1987 >> Starion ESI-R >> Repair and Diagnosis >> Engine Performance >> System >> ECI CEC System >> Testing & Diagnosis >> Self-Diagnosis Test >> Notes

Self-Diagnosis Test: Notes

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. Turn ignition switch to "OFF" position. Connect voltmeter to self-diagnosis output harness connector located in glove box (Starion) or engine compartment (all others). See Fig 1.
  2. Turn ignition switch to "ON" position and indication of ECU memory will start. Record any abnormal diagnostic codes and perform the necessary component repairs.
  3. After checking and repair, disconnect battery negative ground cable (turn ignition off first) for 15 seconds or more to erase abnormal code memory.
NOTE: Memory of oxygen sensor is erased when ignition switch is turned off. To diagnose oxygen sensor, drive vehicle a good distance and keep engine running.
Fig 1: Self-Diagnostic Connector
G61385