Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Mitsubishi >> 2003 >> Lancer LS >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Basic Diagnostic Procedures >> Fuel System >> Fuel Pressure >> Using Fuel Pressure Gauge

Using Fuel Pressure Gauge

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. Remove the union joint and bolt from Adaptor Hose (MD998709) and instead, attach Hose Adaptor (MB998742) to the adaptor hose.
  2. Place a suitable O-ring or gasket on assembled adaptor hose and hose adaptor and install the fuel pressure gauge.
  3. Install the assembled fuel pressure measurement tools between the fuel rail and high-pressure fuel hose. See Fig 1.
Fig 1: Installing Fuel Pressure Gauge
G00229862Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About Brad's Car Manuals