Occupant Classification Sensor: Inspection
WARNING:
If a dent, crack, deformation or rust is detected, replace with a new seat slide adjuster.
NOTE:
For checking of the occupant classification sensor other than described below, refer to the section concerning SRS diagnosis (Refer to
PASSENGER'S AIR BAG OFF INDICATOR LIGHT CHECK ).
- Check the occupant classification sensor for dent, cracks or deformation.
- Check the connector for damage, and terminals for deformation.
- Check that there is no bending or corrosion in the seat slide adjuster.
- Carry out the accuracy check of occupant classification sensor (Refer to ACCURACY CHECK OF OCCUPANT CLASSIFICATION SENSOR ).