Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Mitsubishi >> 2006 >> Raider XLS, RWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine And Emission Control >> Switch - Speed Control >> Removal

Switch - Speed Control: Removal

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
Fig 1: Removing Speed Control Switch
G04284149Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
WARNING: Before attempting to diagnose, remove or install any airbag system or related steering wheel and steering column components you must first disconnect and isolate the negative (ground) battery cable. Wait 2 minutes for system capacitor to discharge before further system service. Failure to do so could result in accidental deployment and possible personal injury.
  1. Disconnect and isolate negative battery cable from battery.
  2. Remove airbag module. Refer to SUPPLEMENTAL RESTRAINT SYSTEM (SRS) .
  3. Unplug electrical connector.
  4. Remove speed control switch mounting screw (1) and remove switch from steering wheel.
scientia non olet · About Brad's Car Manuals