Control Circuit Testing

The starter control circuit components should be tested in the order in which they are listed, as follows:

• Starter Relay  - Refer to RELAY - STARTER MOTOR  Diagnosis and Testing.
• Starter Solenoid  - Refer to STARTER MOTOR  Diagnosis and Testing.
• Ignition Switch  - Refer to IGNITION SWITCH AND KEY LOCK CYLINDER 
• Clutch Pedal Position Switch  - If equipped with manual transmission, refer to CLUTCH PEDAL POSITION SWITCH .
• Park/Neutral Position Switch  - If equipped with automatic transmission, refer to PARK/NEUTRAL POSITION SWITCH .
• Wire harnesses and connections  - Refer to SYSTEM WIRING DIAGRAMS .