Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Nissan-Datsun >> 1992 >> Sentra SE-R >> Repair and Diagnosis (Single Page) >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Ignition System >> Distributor >> Installation

Ignition System: Distributor: Installation

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. To install, reverse removal procedure. Ensure mark(s) or indentations on distributor shaft and housing are aligned. Check distributor rubber "O" ring seal and replace as necessary.
  2. After installing distributor, ensure distributor rotor is aligned with mark made during removal or set at No. 1 cylinder spark plug position. Check and adjust timing. See ADJUSTMENTS article. Tighten distributor hold-down bolt to specification. See TORQUE SPECIFICATIONS  at end of article.
scientia non olet · About Brad's Car Manuals