Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Nissan-Datsun >> 1993 >> Sentra SE-R, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Basic Testing >> Ignition Checks >> DISTRIBUTORLESS Ignition (EI) System >> Ignition Coil Power Source & Ground

Ignition Coil Power Source & Ground

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. Disconnect 3-pin ignition coil connector. Turn ignition on. Check voltage between ground and terminal "B" of ignition coil connector. See Figure.
  2. If battery voltage is not present, go to IGNITION COIL/POWER TRANSISTOR RELAY. If battery voltage exists, turn ignition off. Check continuity between ground and ignition coil connector terminal "A".
  3. If continuity does not exist, repair ground circuit between ignition coil connector terminal "A" and ground. Repeat test for remaining coils.
scientia non olet · About Brad's Car Manuals