Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R Spec V >> Repair and Diagnosis >> External Pages >> Different car >> Section 2175 (Body Control System) >> System Description >> Power Consumption Control System >> System Description >> Low Power Consumption Control With BCM

Low Power Consumption Control With BCM

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
WARNING: This page is about a different car, the 2011 Nissan Xterra. However, it is still accessible from the selected car via links, so may be relevant.

BCM reduces the power consumption with the following operation in the low power consumption mode.

Sleep mode activation

Sleep condition

CAN AND BCM SLEEP CONDITION

CAN sleep condition BCM sleep condition
  • Receiving the sleep-ready signal (ready) from all units
  • Ignition switch: OFF
  • Vehicle security system alarm: No operation
  • Warning lamp: No operation
  • Warning chime: No operation
  • Stop lamp switch: OFF
  • Key switch status: No change for 2 seconds
  • Hazard warning lamp: No operation
  • Exterior lamp: OFF
  • Door lock status: No change for 2 seconds
  • CONSULT-III communication status: No communication
  • Door switch status: No change for 2 seconds
The controls only BCM are completed.
(Interior room lamp battery saver: Time out etc.)

Wake-up operation

Wake-up condition

BCM WAKE-UP CONDITION

BCM wake-up condition
  • Ignition switch: OFF → ACC or ON
  • Stop lamp switch: ON (Depress brake pedal)
  • Any door switch: OFF → ON
  • Lighting switch: OFF → 1ST or PASS
  • Hazard switch: OFF → ON
  • Back door opener switch OFF → ON
  • Remote keyless entry receiver: Receiving