Keyfob Function (Unlock) Check

Download the full database via torrent (~1.1 TB) | Download Brad's custom LEMON patches

NOTE: The Signal Tech II tool (J-50190) can be used to test the remote keyless entry keyfob relative signal strength. Refer to the Signal Tech II User Guide for additional information.

CHECK KEYFOB FUNCTION

With CONSULT

Check keyfob function in "DATA MONITOR" mode with CONSULT. When pushing unlock button of keyfob, the corresponding monitor item should be turned as follows.

Test item	Condition
KEYLESS UNLOCK	Pushing UNLOCK button: ON
KEYLESS UNLOCK	Other than above: OFF

OK or NG

OK: Keyfob is OK.

NG: Replace keyfob.