Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Oldsmobile >> 1998 >> Intrigue Base >> Repair and Diagnosis >> Body & Frame >> Windows >> Power Window System >> Removal & Installation >> Window Switch >> Installation

Window Switch: Installation

Download the full database via torrent (~1.1 TB)  |  Custom patches
  1. Install the switches to the mounting plate. See Fig 2.
  2. Connect the electrical connectors.
  3. Snap the switch and mounting plate into the trim panel. See Fig 1.
Fig 1: Front Door Window Switch
G00159779Courtesy of GENERAL MOTORS CORP.
Fig 2: Front Power Window Switches & Mounting Plate
G00159780Courtesy of GENERAL MOTORS CORP.


  1. Install the switch tabs into the bezel slots. See Fig 2.
  2. Press down on the tabs in order to secure the switch. See Fig 1.
  3. Connect the electrical connector to the window switch.
  4. Align the bezel to the door trim panel opening and press into place to secure.
Fig 1: Rear Door Power Window Switch
G00159781Courtesy of GENERAL MOTORS CORP.
Fig 2: Rear Door Power Window Switch And Switch Plate
G00159782Courtesy of GENERAL MOTORS CORP.
scientia non olet · About Brad's Car Manuals