Ignition Coil

Download the full database via torrent (~1.1 TB) | Download Brad's custom LEMON patches

Coil is designed to operate with an external ballast resistor. When testing coil for output leave resistor connected. Inspect coil for external leaks and arcing. Test coil according to coil tester instructions. Replace coil or ballast resistor that does not meet specifications.

IGNITION COIL SPECIFICATIONS

Type		Resistance @ 70-80° F
Primary
	Chrysler Prestolite	1.60-1.79 Ohms
	Chrysler Essex	1.34-1.55 Ohms
Secondary
	Chrysler Prestolite	9400-11, 700 Ohms
	Chrysler Essex	9000-12, 200 Ohms
Ballast Resistor
	Coil Side	1.15-1.35 Ohms
	Control Side	4.75-5.75 Ohms