Ignition System: Overhaul: Reassembly

Download the full database via torrent (~1.1 TB) | Download Brad's custom LEMON patches

Reverse removal procedure. Inspect cap and rotor for cracks and deposits on inside surfaces. Ensure breaker assembly is clean and no metallic dust or filings are present. Use new distributor drive gear roll pin.

Fig 1: Expl View of Chrys Motors Dist Used W/ 1.5L, 2.0L & 2.4L Engs

Fig 2: Expl View of Chrys Motors Dist Used W/ 1.6L & 2.6L Engines Note location of governor springs for reassembly.