Collapsible Steering Columns: Alignment

Download the full database via torrent (~1.1 TB) | Download Brad's custom LEMON patches

Loosen, but do not remove all column attaching screws and bolts. Column will align when screws are loose. Check flexible coupling for alignment and tighten column bracket-to-instrument panel bolts to specifications. Insert wedge shim in far enough to fill gap and tighten.

NOTE: do not force. Tighten all other bolts to specifications.

JACKET TUBE, STEERING SHAFT ASSEMBLY, BEARING ADAPTER AND BEARING HOUSING REPLACEMENT NOTE : If the jacket tube, steering shaft assembly, bearing adapter and bearing housing are replaced, clearances at lower end of column will be changed. Install a service kit adjuster assembly. Installation procedures are included in the kit.

Fig 1: General Motors Collapsible Steering Column

Courtesy of GENERAL MOTORS COMPANY

Fig 2: Ford Motor Co. Collapsible Steering Column

Courtesy of GENERAL MOTORS COMPANY

Fig 3: American Motors & Chrysler Corp. Collapsible Steering Column (Typical)

Courtesy of GENERAL MOTORS COMPANY

Fig 4: Challenger & Barracuda Impact Absorbing Cannister

Courtesy of GENERAL MOTORS COMPANY