Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Pontiac >> 1984 >> 6000 STE >> Repair and Diagnosis >> Engine Performance >> System >> EGR System - Diesel >> Component Testing >> Control Lever Position Sensor

Control Lever Position Sensor

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. Connect a voltmeter to the "Blue/Yellow" and "Blue/Red" color coded terminals without disconnecting the control lever position sensor connector. The "Blue/Yellow" wire is positive and the "Blue/Red" wire is negative.
  2. Move the control lever so the clearance between the control lever and the idle stopper is .275" (7 mm). Control lever sensor is normal if voltage is 3.3-4.4 volts, after starting engine. If not, replace sensor.
scientia non olet · About Brad's Car Manuals