Customizing Content Theft Deterrent System

Turn ignition switch to RUN position to disarm system. Turn ignition switch to OFF position. Remove RADIO fuse No. 17 (15-amp) from instrument panel fuse block. Instrument panel fuse block is located behind left side of instrument panel. See Figure . Turn ignition switch to ACC position. Chime will sound, indicating programming mode has been entered.

One chime indicates exit lighting, delayed illumination, last door closed locking and lock-out prevention can be customized. Two chimes indicate remote lock control verification, arming method, arming verification, driver's door delay and shock sensor enable/disable can be customized.