Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Pontiac >> 2004 >> Aztek Base, AWD >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Keyless Entry System >> Repair Instructions >> Remote Control Door Lock Receiver Replacement >> Installation Procedure

Installation Procedure

Download the full database via torrent (~1.1 TB)
IMPORTANT: Position the remote control door lock receiver to the defroster air duct.
  1. Install the remote control door lock receiver (2).
  2. Engage the remote control door lock receiver retainers.
  3. Connect the remote control door lock receiver electrical connector (1).
  4. Install the upper trim pad. Refer to Trim Pad Replacement - Instrument Panel (I/P) Upper (Aztek) or Trim Pad Replacement - Instrument Panel (I/P) Upper (Rendezvous) in Instrument Panel, Gages and Console.
    Fig 1: Upper I/P Trim Panel Location View
    GM629215Courtesy of GENERAL MOTORS CORP.
  5. If a new remote control door lock receiver is being installed, program the transmitter. Refer to Transmitter Programming .
scientia non olet · About Brad's Car Manuals