Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Pontiac >> 2006 >> Solstice Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 2.4L - Introduction (2 Of 2) >> Repair Instructions >> Engine Control Module (ECM) Replacement >> Installation Procedure

Installation Procedure

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
    Fig 1: ECM
    GM1593843Courtesy of GENERAL MOTORS CORP.
  1. Slide the ECM into the bracket.
  2. Push down on the ECM until the retaining tab snaps into place.
  3. Fig 2: Engine Harness Electrical Connectors
    GM1592534Courtesy of GENERAL MOTORS CORP.
  4. Connect the engine harness electrical connectors (2) to the ECM.
  5. Connect the negative battery cable. Refer to Battery Negative Cable Disconnect/Connect Procedure .
  6. Reset the clock and preset radio stations.
  7. If a NEW ECM was installed, the ECM must be programmed. Refer to Control Module References .