Control Module HVAC: Testing and Inspection

Download the full database via torrent (~1.1 TB)

HVAC Control Module Programming and Setup

Each of the following service procedures requires programming or setup procedures to be performed on the HVAC control module.

HVAC Control Module Replacement - Automatic HVAC

If the HVAC control module is replaced, the following procedure must be performed:

Re-Calibrating actuators-Refer to Actuators Recalibration. Programming and Relearning

Actuator Replacement - Automatic HVAC

If an actuator is replaced, the following procedure must be performed

Re-Calibrating actuators-Refer to Actuators Recalibration. Programming and Relearning

HVAC Control Module Replacement - Manual HVAC

If the HVAC control module is replaced no additional procedures are necessary.

Actuator Replacement - Manual HVAC

If an actuator is replaced, a re-calibration of the actuator is not necessary. The HVAC module knows the exact location of the door when the HVAC system is turned on.