Installation Procedure

Download the full database via torrent (~1.1 TB) | Download Brad's custom LEMON patches

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying RPA Receiver & Fasteners

Courtesy of GENERAL MOTORS CORP.

Install the RPA receiver to the rear window shelf.
Install the RPA receiver fastener.

Fig 2: Locating Rear Parking Assist (RPA) Receiver

Courtesy of GENERAL MOTORS CORP.

Connect the electrical connector (2) to the RPA receiver.
Install the rear window shelf trim panel. Refer to Rear Window Shelf Trim Panel Replacement .
Refer to Control Module References for programming and setup information.