System Specifications

Download the full database via torrent (~1.1 TB) | Download Brad's custom LEMON patches

Crankshaft Balancer Bolt
Installation Pass Using the Old Bolt to Ensure the Balancer is Completely Installed 125 N.m (92 lb ft)
First Pass - Install a NEW Bolt After the Installation Pass and Tighten as Described in the First and Final Passes 125 N.m (92 lb ft)
Final Pass 130 degrees

Timing Chain Tensioner Bolt 21 N.m (15 lb ft)

Engine Front Cover Bolt 25 N.m (18 lb ft)