Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Pontiac >> 2008 >> Vibe Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 125 (Data Communications) >> Repair Instructions >> Body Control Module Replacement

Body Control Module Replacement

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
WARNING: This page is about a different car, the 2008 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Body Control Module
GM1955110Courtesy of GENERAL MOTORS CORP.
Callout Component Name
1 Body Control Module

Procedure

  1. Pull tear tape off the wiring harness prior to removing connectors.
  2. Disconnect the electrical connectors.
  3. Press on the tabs to release the body control module.

  4. After serviced use tie strap.
  5. If a replacement module is installed, program the module. Refer to Control Module References